Guangdong ALI Testing Equipment Co,.Ltd
GSKA Group Specialized in kinds of PARTS since 1985, Developed and manufactured various generators and generator sets.
Add to Cart
44 kw 380V Marine Diesel Engines For Generator With Alternator LL2014D
1, Generating Set Model: GEP55-2
2, Engine Make & Model: Perkins 1104C-44TG2/3
3, Alternator Model: LL2014D
3, Circuit Breaker Type: 3 Pole MCCB
4, Frequency: 50 Hz
5, Cycle: 4 Stroke
6, Engine Speed: 1500 rpm
7, Cooling Method: Water
8, Governing Type: Electronic
9, Output Type: AC Three Phase
10, Base Frame Type: Heavy Duty FabriCAT-parts-partsed Steel
FEATURES
|
Output Ratings |
||
|
Generating Set Model |
Prime* |
Standby* |
|
380-415V, 50Hz |
50.0 kva 40.0 kw |
55.0kva 44.0 kw |
|
220/127V,60Hz |
* * |
* * |
|
Technical Data |
||
|
Engine Make & Model |
Perkins 1104C-44TG2/3 |
|
|
Alternator Model |
LL2014D |
|
|
Base Frame Type |
Heavy Duty FabriCAT-parts-partsed Steel |
|
|
Circuit Breaker Type |
3 Pole MCB |
|
|
Frequency |
50 Hz |
60 Hz |
|
Engine Speed( RPM) |
1500 |
* |
|
Fuel Tank Capacity: litres (US gal) |
175(46.2) |
|
|
Fuel Consumption,Prime: l/hr( US gal/hr) |
11.7(3.1) |
* |
|
Fuel Consumption,Standby: l/hr( US gal/hr) |
13.3(3.5) |
* |
Engine Techncial Data
Physical Data
Manufacturer: Perkins
Model: 1104C-44TG2/3
No.of Cylinders/Alignment: 4/ In Line
Cycle: 4 stroke
Induction: Turbocharged
Cooling Method: Water
Governing Type: Mechanical
Governing Class: ISO 8528 G2
Compression Ratio: 18.2:1
Displacement: I(cu.in) 4.4(268.5)
Bore/Stroke: mm(in) 105.0(4.1)/127.0(5.0)
Moment of Inertia: kg*㎡(Ib.in2) 1.14(3896)
Engine Electrical System:
* Voltage/ Ground: 12/ Negative
* Battery Charger Amps: 65
Weight: kg( Ib)* Dry: 463 (1021)
*Wet : 485(1069)
LubriCAT-parts-partsion System
Oil Filter Type: Spin-on,Full Flow
Totel Oil Capacity I (US gal): 8.0(2.1)
Oil Pan I (US gal): 7.0(1.8)
Oil Type: API- CC/ SE
Cooling Method: Water
Cooling System 50Hz 60Hz
Cooling System Capacity:I ( us gal) 13.0(3.4)
Water Pump Type: ℃ Centrifugal
Heat Rejected to Water& Lube Oil:
KW(Btu/ min)
*Standby: 34.0(1934)
*Prime: 30.0(1706)
Heat Radiation to Room:
KW (Btu/ min) *Standby: 8.0(455)
*Prime: 7.0(341)
Radiator Fan Load: KW( hp) 1.0(1.3)
Cooling system designed to operate in ambient conditions up to 50℃.
Exhaust System
Silencer Type: Level 1
Silencer Noise Reduction: SD50(1)
Max.Allowable Back
Pressure: kPa( in. Hg) 3.30(0.974)
Silencer Noise Reduction
Level:Db 19
Max.allowable back
Pressure: kpa( in. Hg) 15.0(4.4)
Exhaust Gas Flow:
m ³/ min(cfm) * Sandby: 11.8(417)
* Prime 10.9(385)
Exhaust Gas Temperature: ℃/℉
m ³/ min(cfm) * Sandby: 583(1081)
* Prime: 535(995)
Performance 50Hz 60Hz
Engine Speed: RPM 1500
Gross Engine Power: kw (hp)
* Standby: 62.5(84.0)
* Prime: 56.2(75.0)
BMEP: kpa (psi)
* Standby: 1137.0(164.9)
* Prime: 1022.0(148.2)
Regenerative Power: Kw 8.1
Air System 50Hz 60Hz
Air Filter Type: Replaceable
Element Combustion Air Flow:m ³/ min(cfm)
*Standby: 4.2(149)
* Prime 4.1(145)
Max.Combustion Air Intake Restriction : kpa ( In H2O) 8.032.1)
Radiator Cooling Air Flow: m ³/ min(cfm) 97.8(3454)
External Restriction to Cooling Air Flow: Pa(in H2O) 125(0.5)
Fuel System
Fuel Filter Type: Replaceable Element
Recommended Fuel: Class A2 Diesel
Fuel Consumption: L/hr (us gal/hr)
110% 110% 75% 50%
Load Load Load Load
Prime
50Hz 13.3(3.5) 11.7(3.1) 8.0(2.1) 4.8(1.3)
60Hz
Standby
50Hz 13.3(3.5) 9.0(2.4) 5.4(1.4)
60Hz
( based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869,Class A2 )
Alternator Technical Data
|
Physical Data |
Operating Data |
|
Manufacturer: Olympian Model: LL2014D No.of Bearings: 1 Insulation Class: H Winding Pitch*Code: 2/3*6 Wires: 12 Ingress Protection Rating: IP23 Excitation System: SHUNT AVR Model: R250 |
Overspeed: RPM 2250 Voltage Regulation(steedby State) (%) +/- 0.5 Wave Form NEMA= TIF: 50 Wave Form IEC= THF 2.0% Toal Harmonic Content LL/LN: 4.0% Radio Interference: Superssion is in Line with European Standard EN61000-6 Radiant Heat: Kw (btu/Min) *50Hz 6.1(347) *60Hz |
Weights & Dimensions
|
Weights: Kg ( Ib ) |
|
|
Net (+ Lube oil) |
894(1971) |
|
Wet(+ Lube oil & coolant ) |
904(1993) |
|
Fuel,Lube oil & coolant |
1052(2319) |
|
Dimensions: mm( in ) |
|
|
Length: |
2150(84.6) |
|
Width: |
752(29.6) |
|
Height: |
1366(53.8) |