Guangdong ALI Testing Equipment Co,.Ltd
GSKA Group Specialized in kinds of PARTS since 1985, Developed and manufactured various generators and generator sets.
Add to Cart
1, Engine Make & Model: Perkins 4012TWG2
2,Generating Set Model: P1375E1
3,Alternator Model: LL8124L
4, Circuit Breaker Type: 3 Pole ACB
5, Frequency: 50 Hz / 60 Hz
6,Cycle: 4 Stroke
7, Engine Speed: 1500rpm
8, Cooling Method: Turbo, Water/Air cooling
9, Governing Type: Electronic
10, Output Type: AC Three Phase
10, No.of Cylinders/Alignment: 8 / In Line
11,Base Frame Type:Heavy Duty FabriCAT-parts-partsed Steel
1000kW 1500RPM Perkins Diesel Generator , P1375E1
| Output Ratings | |
| Generating Set Model | * P1375E1 Prime* Standby* |
| 380-415V, 50 Hz | 1250.0 kVA 1375.0 kVA 1000.0 kW 1100.0 kW |
| 220/127V, 60 Hz | - - - - |
Ratings at 0.8 power factor.
| Technical Data | |
|
Engine Make & Model: |
Perkins 4012TWG2 |
|
Alternator Model: |
LL8124L |
|
Base Frame Type: |
Heavy Duty FabriCAT-parts-partsed Steel |
|
Circuit Breaker Type: |
3 Pole ACB |
|
Frequency: |
50 Hz 60 Hz |
|
Engine Speed: RPM |
1500 - |
|
Fuel Tank Capacity: litres (US gal) |
- |
|
Fuel Consumption: P1250P1 l/hr (US gal/hr) |
264.3 (69.8) - |
|
Fuel Consumption: P1375E1 l/hr (US gal/hr) |
292.1 (77.2) - |
P1250P1 / P1375E1
Engine Technical Data
| Physical Data Air System 50 Hz 60 Hz | ||
|
Manufacturer: Perkins Model: 4012TWG2 No. of Cylinders/Alignment: 12 / Vee Cycle: 4 Stroke Induction: Turbocharged Cooling Method: Water Governing Type: Electronic Governing Class: ISO 8528 G2 Compression Ratio: 13.6:1 Displacement: l (cu.in) 45.8 (2797.5) Bore/Stroke: mm (in) 160.0 (6.3)/190.0 (7.5) Moment of Inertia: kg m² (lb. in²) 19.30 (65951) Engine Electrical System: -Voltage/Ground: 24/Negative -Battery Charger Amps: 40 Weight: kg (lb) - Dry: 4440 (9788) - Wet: 4604 (10150) |
Air Filter Type: Replaceable Element Combustion Air Flow: m³/min (cfm) -Standby: 97.0 (3426) - -Prime: 91.0 (3214) - Max. Combustion Air Intake Restriction: kPa (in H2O) 3.7 (14.9) - Radiator Cooling Air Flow: m³/min (cfm) 1106.0 (39058) - External Restriction to Cooling Air Flow: Pa (in H2O) 250 (1.0) - | |
| Cooling System 50 Hz 60 Hz | ||
|
Cooling System Capacity: l (US gal) 206.0 (54.4) - Water Pump Type: Centrifugal Heat Rejected to Water & Lube Oil: kW (Btu/min)
-Standby: 467.0 (26558) - -Prime: 410.0 (23316) - Heat Radiation to Room: kW (Btu/min) -Standby: 165.0 (9383) - -Prime: 148.0 (8417) - Radiator Fan Load: kW (hp) 45.0 (60.4) - Cooling system designed to operate in ambient conditions up to 50°C (122°F).
| ||
| Performance 50 Hz 60 Hz | ||
| Engine Speed: RPM 1500 - Gross Engine Power: kW (hp) -Standby: 1182.0 (1585.0) - -Prime: 1094.0 (1467.0) - BMEP: kPa (psi) -Standby: 2063.0 (299.2) - -Prime: 1909.0 (276.9) - Regenerative Power: kW 120.0 - | ||
| LubriCAT-parts-partsion System | ||
|
Oil Filter Type: Spin-On, Full Flow Total Oil Capacity l (US gal): 173.0 (45.7) Oil Pan l (US gal): 159.0 (42.0) Oil Type: API CG4 15W-40 Cooling Method: Water | ||
| Fuel System | ||
|
Fuel Filter Type: Replaceable Element Recommended Fuel: Class A2 Diesel Fuel Consumption: l/hr (US gal/hr)
110% 100% 75% 50% Load Load Load Load P1250P1
50 Hz 292.1 (77.2) 264.3 (69.8) 199.3 (52.6) 140.3 (37.1) 60 Hz - - - -
P1375E1
50 Hz 292.1 (77.2) 218.2 (57.6) 151.4 (40.0) 60 Hz - - -
(based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869, Class A2) | ||
| Exhaust System 50 Hz 60 Hz | ||
|
Silencer Type: Level 1 Silencer Model & Qty: SD300 (1) Pressure Drop Across Silencer System: kPa (in Hg) 0.30 (0.089) - Silencer Noise Reduction Level: dB 25 - Max. Allowable Back Pressure: kPa (in. Hg) 9.3 (2.7) - Exhaust Gas Flow: m³/min (cfm) -Standby: 245.0 (8652) - -Prime: 245.0 (8652) - Exhaust Gas Temperature: °C (°F) m³/min (cfm) -Standby: 460 (860) - -Prime: 460 (860) | ||
P1250P1 / P1375E1
Alternator Performance Data
|
Data Item | 50 Hz | ||
| 415/240V | 400/230V | 380/220V | |
|
Motor Starting Capability* kVA |
3319 |
3093 |
2803 |
|
Short Circuit Capacity** % |
300 |
300 |
300 |
|
Reactances: Per Unit
Xd X'd X''d |
3.290
0.230
0.128 |
3.540
0.250
0.138 |
3.920
0.280
0.153 |
Reactances shown are applicable to prime ratings
** With optional Permanent Magnet generator or AREP excitation.
Alternator Technical Data
| Physical Data Operating Data | |
|
Manufacturer: FG WILSON |
Overspeed: RPM 2250 |
|
Model: LL8124L |
Voltage Regulation (steady state) (%): + /- 0.5 |
|
No. of Bearings: 1 |
Wave Form NEMA = TIF: 50 |
|
Insulation Class: H |
Wave Form IEC = THF: 2.0% |
|
Winding Pitch Code: 2/3 - 6S |
Total Harmonic Content LL/LN: 3.5% |
|
Wires: 6 | Supression is in line with European Standard Radio Interference: EN61000-6 |
|
Ingress Protection Rating: IP23 |
Radiant Heat: kW (Btu/min)
-50 Hz: 55.5 (3156)
-60 Hz: - |
|
Excitation System: AREP | |
|
AVR Model: R449 | |
P1250P1 / P1375E1
Technical Data
3 Phase Ratings and Performance at 50 Hz, 1500 RPM
3 Phase Ratings and Performance at 60 Hz- RPM
|
Voltage Prime Model Standby Model Voltage Prime Model Standby Model P1250P1 P1375E1 - - | |||||
|
| kVA kW | kVA kW |
| kVA kW | kVA kW |
| 415/240V | 1250.0 1000.0 | 1375.0 1100.0 |
|
|
|
| 400/230V | 1250.0 1000.0 | 1375.0 1100.0 |
|
|
|
| 380/220V | 1250.0 1000.0 | 1375.0 1100.0 |
|
|
|
Definitions
Standby Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3).
Prime Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
Standard Reference Conditions
Note: Standard reference conditions 27°C (80°F) Air Inlet Temp, 152.4m (500ft) A.S.L. 60% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2.
Weights and Dimensions
General Data
Documents
A full set of operation and maintenance manuals, circuit wiring diagrams, and commissioning/fault finding instruction leaflets.
Generating Set Standards
The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, VDE 0530, NEMA MG-1.22.
Warranty
All equipment carries full manufacturer's warranty.