Guangdong ALI Testing Equipment Co,.Ltd
GSKA Group Specialized in kinds of PARTS since 1985, Developed and manufactured various generators and generator sets.
Add to Cart
1. Standby power : 28.0 kw
2.Engine Make & Model: Perkins 404C-22G2 HS
3.Alternator Model: LL1012P
4.Induction: Naturally Aspirated
5.Cooling Method: Water Governing
6.Type: Mechanical Governing
7.Class: ISO 8528 G2
8.Compression Ratio: 23.3:1
9.Displacement: l (cu.in) 2.2 (135.2)
10.Bore/Stroke: mm (in) 84.0 (3.3)/100.0 (3.9)
11.Moment of Inertia: kg m² (lb. in²) 1.10 (3759)
1500 RPM Perkins Engine Generator , 404C-22G2 HS
| Output Ratings | |
| Generating Set Model | JPPH35E2 Prime* Standby* |
| 380-415V, 50 Hz | * 35.0 kVA * 28.0 kW |
| 220/127V, 60 Hz | * * * * |
Ratings at 0.8 power factor.
| Technical Data | |
| Engine Make & Model: | Perkins 404C-22G2 HS |
| Alternator Model: | LL1012P |
| Base Frame Type: | Heavy Duty FabriCAT-parts-partsed Steel |
| Circuit Breaker Type: | 3 Pole MCB |
| Frequency: | 50 Hz 60 Hz |
| Engine Speed: RPM | 1500 * |
| Fuel Tank Capacity: litres (US gal) | 45 (11.9) |
| Fuel Consumption: P12.5P2 l/hr (US gal/hr) | * * |
| Fuel Consumption: P13.5E2 l/hr (US gal/hr) | 10.1 (2.7) * |
PH35E2
Engine Technical Data
Physical Data
Manufacturer: Perkins
Model: 404C-22G2 HS
No. of Cylinders/Alignment: 4 / In Line
Cycle: 4 Stroke
Induction: Naturally Aspirated
Cooling Method: Water
Governing Type: Mechanical
Governing Class: ISO 8528 G2
Compression Ratio: 23.3:1
Displacement: l (cu.in) 2.2 (135.2)
Bore/Stroke: mm (in) 84.0 (3.3)/100.0 (3.9)
Moment of Inertia: kg m² (lb. in²) 1.10 (3759)
Engine Electrical System:
-Voltage/Ground: 12/Negative
-Battery Charger Amps: 55
Weight: kg (lb)
- Dry: 218 (481)
- Wet: 234 (517)
Air System 50 Hz 60 Hz
Air Filter Type: Replaceable
Element Combustion Air Flow:m³/min (cfm)
-Standby: 2.9 (102) -
-Prime: -
- Max. Combustion Air Intake
Restriction: kPa (in H2O) 6.4 (25.7)
- Radiator Cooling Air Flow:m³/min (cfm) 71.0 (2507)
- External Restriction to
Cooling Air Flow: Pa (in H2O) 125 (0.5)
Cooling System 50 Hz 60 Hz
Cooling System Capacity:l (US gal) 6.8 (1.8)
- Water Pump Type: Centrifugal
Heat Rejected to Water &Lube Oil: kW (Btu/min)
-Standby: 33.5 (1905)
-Prime: -
- Heat Radiation to Room:
kW (Btu/min)
-Standby: 13.2 (751)
Cooling System 50 Hz 60 Hz
Cooling System Capacity:l (US gal) 6.8 (1.8)
- Water Pump Type: Centrifugal Heat Rejected to Water &
Lube Oil: kW (Btu/min)
-Standby: 33.5 (1905) -
-Prime: -
- Heat Radiation to Room:
kW (Btu/min)
-Standby: 13.2 (751) -
Performance 50 Hz 60 Hz
Engine Speed: RPM 3000
- Gross Engine Power: kW (hp)
-Standby: 34.4 (46.0)
-Prime:
- BMEP: kPa (psi)
-Standby: 1242.0 (180.1)
-Prime:
- Regenerative Power: kW 19.0
LubriCAT-parts-partsion System
Oil Filter Type: Spin-On, Full Flow
Total Oil Capacity l (US gal): 10.6 (2.8)
Oil Pan l (US gal): 8.9 (2.4)
Oil Type: AP1CH4 15W-40
Cooling Method: Water
Fuel System
Fuel Filter Type: Replaceable Element Recommended
Fuel: Class A2 Diesel
Fuel Consumption: l/hr (US gal/hr)
110% 100% 75% 50%
Load Load Load Load
-
50 Hz - - - -
60 Hz - - - -
PH35E2
50 Hz 10.1 (2.7) 7.9 (2.1) 6.2 (1.6)
60 Hz - - -
(based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869, Class A2)
Exhaust System 50 Hz 60 Hz
Silencer Type: Level 1
Silencer Model & Qty: MXC0996 (1)
Pressure Drop Across
Silencer System: kPa (in Hg) 6.00 (1.772)
- Silencer Noise Reduction
Level: dB 27.6
- Max. Allowable Back
Pressure: kPa (in. Hg) 10.2 (3.0)
- Exhaust Gas Flow: m³/min (cfm)
-Standby: 8.5 (300)
-Prime:
- Exhaust Gas Temperature: °C (°F)
m³/min (cfm)
-Standby: 570 (1058)
-Prime:
PH35E2
Alternator Performance Dat
| Data Item | 50 Hz 60 Hz | ||
| 415/240V | 400/230V | 380/220V | |
| Motor Starting Capability* kVA | 83 | 78 | 72 |
| Short Circuit Capacity** % | 0 | 0 | 0 |
| Reactances: Per Unit
Xd X'd X''d |
3.410 0.080 0.037 |
3.680 0.080 0.039 |
4.070 0.090 0.044 |
Reactances shown are applicable to prime ratings
** With optional Permanent Magnet generator or AREP excitation.
Alternator Technical Data
| Physical Data Operating Data | |
|
Manufacturer: FG WILSON |
Overspeed: RPM 4500 |
| Model: LL1012P | Voltage Regulation (steady state) (%): + /- 0.5 |
| No. of Bearings: 1 | Wave Form NEMA = TIF: 50 |
| Insulation Class: H | Wave Form IEC = THF: 2.0% |
| Winding Pitch Code: 2/3 - 6 | Total Harmonic Content LL/LN: 4.0% |
| Wires: 12 | Supression is in line with European Standard Radio Interference: EN61000-6 |
| Ingress Protection Rating: IP23 | Radiant Heat: kW (Btu/min) -50 Hz: 4.0 (227) -60 Hz: - |
| Excitation System: SHUNT | |
| AVR Model: R230 | |
PH35E2
Technical Data
3 Phase Ratings and Performance at 50 Hz, 3000 RPM
3 Phase Ratings and Performance at 60 Hz,
- RPM
|
Voltage Prime Model Standby Model Voltage Prime Model Standby Model PH35E2 - - | ||||
|
| kVA kW | kVA kW | kVA kW | kVA kW |
| 415/240V | - - | 35.0 28.0 |
|
|
| 400/230V | - - | 35.0 28.0 |
|
|
| 380/220V | - - | 35.0 28.0 |
|
|
Definitions
Standby Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3).
Prime Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
Standard Reference Conditions
Note: Standard reference conditions 27°C (80°F) Air Inlet Temp, 152.4m (500ft) A.S.L. 60% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2.
Weights and Dimensions
Weights: kg (lb) Dimensions: mm (in)
|
Net (+ lube oil) |
461 (1016) |
Length |
1320 (52.0) |
| Wet (+ lube oil & coolant) | 468 (1032) | Width | 552 (21.7) |
| Fuel, lube oil & coolant | 506 (1116) | Height | 1258 (49.5) |
General Data
Documents
A full set of operation and maintenance manuals, circuit wiring diagrams, and commissioning/fault finding instruction leaflets.
Generating Set Standards
The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, VDE 0530, NEMA MG-1.22.
FG Wilson is a fully accredited ISO 9001 company.
Warranty
All equipment carries full manufacturer's warranty.