
Add to Cart
380VAC 10KVA 3/3 Three Phase Online UPS For Data Centre Anc Computer
Description
When the mains power input is normal, UPS supplies the power to the load for use after the voltage stabilization. At this time, the UPS is an AC type electric voltage regulator, and it also charges the battery in the machine; when the power supply is interrupted (the accident is cut off), the ups will be charged with the battery in the machine; when the power supply is interrupted (the accident is cut off), the ups will supply the power supply to the load for use The DC energy of the battery shall be supplied to the load by switching and converting the inverter to the load continuously, so as to keep the load working normally and protect the load software and hardware from damage. UPS equipment usually provides protection against high or low voltage.
Feature
SpecifiCAT-parts-partsion
Inverter | Phase | 3 phase +N | |||||||||||||
Rated power | Rated capacity*0.8 | ||||||||||||||
Nominal voltage | 380/400/415VAC | ||||||||||||||
Output voltage stability | ±1%(Stable load),±3%(fluctuant load) | ||||||||||||||
Frequency stability | 50Hz±0.1% | ||||||||||||||
Crest Factor | >3:1 | ||||||||||||||
Output waveform distortion | Sine wave ,linear load<3%;non-linear load<5% | ||||||||||||||
Dynamic characteristic | Instant voltage<±5%(from 0 to 100%),instant recover time<10ms | ||||||||||||||
Unbalanced load voltage | <±5% | ||||||||||||||
Overload Protection | 125%10m;150%60S;200%200ms | ||||||||||||||
Inverter efficiency | >95%(full load) |